Test Reports

The test reports listed below are a sample of the types of testing that Meritec performs to measure the overall performance of our products. We test electrical and mechanical parameters as well as the high speed characteristics of our products to assist our customers with their signal integrity requirements.

  Cable Assembly Topics:

	Equalization of Meritec's 2mm Hard Metric Cable Assemblies Testing results of Meritec 2mm Hard Metric to determine the effects of passive equalization on eye pattern diagrams when high pass filters are used to...
	HPM-5 Performance Testing Testing results of Meritec HPM-5 for Eye Pattern, Attenuation, and Skew...
	4X - 12X Data Rates and Loss vs. Distance Report Testing results of the Meritec Direct Attach 4X and 12X Cable Assemblies for Cross Talk...
	4X/12X Direct Attach Performance Report Test results on Impedance, Eye Pattern, Jitter and Insertion Loss of the 24, 26, 28 and 30 awg cable assemblies
	4X/12X DDR and QDR Performance Test Results Test results of 4X/12X cable assemblies unequalized at DDR (5 Gb/s) and QDR (10 Gb/s)
	4X Latch Retention Compliance testing of Meritec 4X latch actuator against Infiniband™ retention specification
	Meritec Direct Attach 4/12X High Current Testing Test results determine temperature rise above ambient with multiple contacts sharing a single current load...
	4X Cables SAS-2 6Gbs Feasibility Report Testing results of Meritec SFF-8470 cable assembly for eye pattern...
	HSSDC2 Cable Assemblies for InfiniBand™ and Fibre Channel Applications Testing results of Meritec InfiniBand™ to determine suitability with eye patterns...
	Ribbon Micro-Gage Coax Assembly, .025 Testing results of Meritec Ribbon Micro-Gage Coax for eye pattern and cross talk...
	CP50 1.5 meter Differential Pair Cable Assembly Testing results of Meritec CP50 I/O for eye pattern, attenuation, and cross talk...

  Connector Topics:

Test Report #207850A, Plating Evaluation for Solderability This test report provides detailed information regarding the solderability of gold contacts to the PCB... (This test report supports both PCI and PCI Express contact plating changes)

Test Report #96572, Qualification Testing  Qualification testing performed on TSOP and PSOP sockets... (11 MB)

	4X Feed-Thru Test Report Signal Performance Testing of Meritec 4X Feed-Thru Connectors...
	Comparison of Electrical Characteristics of Meritec's Road Runner and Teradyne's VHDM-RAM® ... Testing results of Meritec Road Runner Connector for attenuation...
	Qualification Testing of Meritec High Power Conformal Connector Testing results associated with qualification testing of Meritec High Power Conformal Connector...
	Right Angle PCI Express™ Test Report Testing results of Meritec Right Angle Card Edge Connector for cross talk...
	Single Line RLC Models of Meritec Right Angle PCI Connectors Testing results performed on the Meritec R/A PCI Connector...

  Flat Flex Cabling Topics:

FFC Electrical Impedance Test Test results determining the imedance of various pitches of FFC and FRC when used with and without shielding...

  Miscellaneous Topics:

Modeling and Testing Capability Testing results of Meritec Electrical Lab for Impedance, Skew, Eye Pattern, Attenuation, and Cross talk Testing...